760FS Deep Talkin’ Bass Flats – Standard 45-105

▾Since the 50s and 60s, La Bella’s DEEP TALKIN’ BASS Stainless Steel Flat Wounds have been the choice of professional bass players and continue to be the standard for the best sounding Flat Wounds on the market.      

Stainless Steel Flat Wound; hand-polished for incredibly smooth finish
Standard Tension
String Gauges: .045, .065, .085, .105
Standard Long Scale Set
Made in the USA with American Wire
Packaged using MAP Technology (Modified Atmosphere Packaging) to prevent tarnishing and ensure freshness


All standard bass sets are LONG scale length. The 1st (G), 2nd (D), 3rd (A) strings are 38” from ball-end to silk/taper. The 4th (E) string is 36 ¾” from ball-end to silk/taper. Only the silk portion of the string should wrap around the tuning post or else the string will break.

Please refer to our BASS GUIDE for assistance in choosing the correct scale set CLICK HERE.

This particular set is NOT suitable for basses with bridges that require strings to pass through the body of the instrument. Please refer to item 760FS-TB “Thru-Body” CLICK HERE.
Also available in short, medium and extra long scale models for 4-String, 5-String & 6-String Sets:

Short Scale: 760FS-S 32 1/4″ Wound Length
Medium Scale: 760FS-M – 34 1/4″ Wound Length
Extra-Long Scale: 760FS-XL – 38″ Wound Length

Since the 50s and 60s, La Bella's DEEP TALKIN' BASS Stainless Steel Flat Wounds have been the choice of professional bass players and continue to be the standard for the best sounding Flat Wounds on the market. 

Stainless Steel Flat Wound; hand-polished for incredibly smooth finish
Designed for Basses that String Through the Body (not suitable for top load bridges)
Standard Tension
5-String Set: .045, .065, .085, .105, .128T
Standard Long Scale Set
Made in the USA with American Wire
Packaged using MAP Technology (Modified Atmosphere Packaging) to prevent tarnishing and ensure freshnessThis particular set is standard long scale through-body. The 1st (G), 2nd (D), 3rd (A) strings are 38” from ball-end to silk/taper. The 4th (E) and 5th (B) strings are 37 1/4” from ball-end to silk/taper. Only the silk portion of the string should wrap around the tuning post or else the string will break. The silk portion by the ball-ends are 1 3/4". Only the silk portion by the ball-end can bend at a 90 degree angle. 

Please refer to our BASS GUIDE for assistance in choosing the correct scale set CLICK HERE.

760M Deep Talkin Bass

Original 1954 52-110

Lakland Skyline - Darrell Jones 5 String Bass



The Skyline Series Darryl Jones Signature Model DJ-5 features the same “updated classic” tone as our DJ-4, but is combined with the legendary Lakland 35” scale – the reason all Lakland 5s have such fabulous bottom tone. When you talk about clarity, tautness and tone in regards to the low B, you’re talking about our passion! Graphite reinforcement bars are added for tonal stability and the dual vintage voiced single coil Lakland pickups are hand fabricated and wound with exact tolerances in our Chicago shop.

Looks, ergonomics, playability, and that big bottom tone make this one of Lakland’s most popular and longstanding models.

Nut width 1.81”
Nut Type Delrin
Fret size .041/.085”
Width at final fret 3″
1st fret neck depth .81”
12th fret neck depth .92″
Fingerboard radius 12″
Scale length 35”
Frets 21
Bridge string spacing .75”
Neck wood Flat-sawn Maple with graphite reinforcement bars
Body wood Swamp Ash
Fingerboard wood Maple

Tuners Hipshot Ultralites
Truss rod access Neck heel: 4mm hex
Pickguard White Perloid
Controls Volume/Volume/Tone (passive)
Bridge Lakland Dual Access (through body or through bridge)
Preamp J-Retro (optional)
Pickups Lakland Vintage J single coil pickups

White Pearl with Maple fingerboard


Comes with Stagg ABS Hard Case and Ritter Soft Gig Bag

$99 incl. GST

Description

RX▾Not all constructions are created equal. Every string in the Rx Series is uniquely constructed for that particular set. This “Focused Set Design” concept helps achieve all the elements of a perfectly balanced set such as tone, feel, vibrato, and tension. More flexible and lighter in tension compared to our SN & M Series, players will find the RX Series are more comfortable to play on any style bass. The RX Series is just the remedy your bass has been calling for!

 

Nickel-Plated Round Wound
More flexible & lighter tension than Standard La Bella SN Series
String Gauges: .045, .065, .085, .105, .130
Versatile construction appeals to every style bass, genre of music and playing style
Made in the USA with American Wire
Packaged using MAP Technology (Modified Atmosphere Packaging) to prevent tarnishing and ensure freshness


All standard bass sets are LONG scale length. The 1st (G) string is wound the full length at 48″. The 2nd (D) and 3rd (A) strings are 38” from ball-end to taper. The 4th (E) and 5th (B) strings are 37” from ball-end to taper.

Please refer to our BASS GUIDE for assistance in choosing the correct scale set CLICK HERE.

Also available in short, medium and extra long scale models for 4-String, 5-String & 6-String Sets:

Short Scale: RX-N5D-S (32 1/4″ ball-end to taper)
Medium Scale: RX-N5D-M (34 1/4″ ball-end to taper)
Extra-Long Scale: RX-N5D-XL (38″ ball-end to taper)

Lakland Skyline 44-51

Candy Apple Red

La Bella RX-S4C Stainless 45-105

760FS Deep Talkin’ Bass Flats – Standard 45-105

$99.00 incl. GST

$49.95 incl. GST

Was $2,585.00, Now $2,295.00, Last one at this price before the next shipment.

Description

The 0760M set was used on virtually every Motown gold record in the 1960s. Donald “Duck” Dunn used the same strings on countless recordings with Otis Redding and Booker T. & the MG’s. They’re the fullest and deepest sounding bass strings ever made. Stainless Steel Flat Wound strings constructed with thick cores to produce full, deep, vintage tone

Tension: Heavy
String Gauges: .052, .073, .095, .110
Standard Long Scale Set
Made in the USA with American Wire
Packaged using MAP Technology (Modified Atmosphere Packaging) to prevent tarnishing and ensure freshness
 

  All standard bass sets are LONG scale length. The 1st (G), 2nd (D), 3rd (A) strings are 38” from ball-end to silk/taper. The 4th (E) string is 36 ¾” from ball-end to silk/taper. Only the silk portion of the string should wrap around the tuning post or else the string will break.   Please refer to our BASS GUIDE for assistance in choosing the correct scale set CLICK HERE.   This particular set is NOT suitable for basses with bridges that require strings to pass through the body of the instrument.

The Classic take on the legendary 51 P Bass that set the bar for electric basses. Last of this model available until 2nd quarter 2023 at this price.  Check out all the info at Lakland.com/skyline 44-51

$49.95 incl. GST

The 44-64 Custom PJ expands upon the 44-64 by adding a single coil “J” style bridge pickup into the mix for added versatility. Additionally, the Custom adds a 1.5” (J) neck taper with pearl block inlay markers, matching headstock colour and bound Indian Laurel fingerboard. Ice Blue model features a maple unbound fingerboard with special abalone accented position markers.

Nut width 1.5″
Nut type Delrin
Fret size .041/.085”
Width at final fret 2.48”
1st fret neck depth .76”
12th fret neck depth .94″
Fingerboard radius 10″
Scale length 34″
Frets 20
Bridge string spacing .75″
Neck wood Flat-sawn Rock Maple
Body wood Ash
Fingerboard wood Indian Laurel
Tuners Hipshot Ultralites (optional Hipshot D-Tuner)
Truss rod access Neck heel: 4mm hex
Controls Volume/Volume/Tone
Bridge Lakland Dual Access (through body or through bridge)
Pickups Lakland Hybrid split “P” pickup & Single Coil “J” bridge pickup

Finish Honeyburst

Description
STRING TYPE

RX-S4A Rx Stainless , 40-60-80-100 RX-S4B Rx Stainless , 45-65-80-100 RX-S4C Rx Stainless , 45-65-80-105 RX-S4D Rx Stainless , 45-65-85-105 RX-S4D-XL Rx Stainless , 45-65-85-105, Extra Long Scale 

RX-S4C Rx Stainless , 45-65-80-105



PRODUCT DESCRIPTION

Not all constructions are created equal. Every string in the Rx Series is uniquely constructed for that particular set. This “Focused Set Design” concept helps achieve all the elements of a perfectly balanced set such as tone, feel, vibrato, and tension. More flexible and lighter in tension compared to our SN & M Series, players will find the RX Series are more comfortable to play on any style bass. The RX Series is just the remedy your bass has been calling for!

Stainless Steel Round Wound
More flexible & lighter tension than Standard La Bella M Series
String Gauges: .045, .065, .080, .105
Versatile construction appeals to every style bass, genre of music and playing style
Made in the USA with American Wire
Packaged using MAP Technology (Modified Atmosphere Packaging) to prevent tarnishing and ensure freshness


All standard bass sets are LONG scale length. The 1st (G) string is wound the full length at 48″. The 2nd (D) and 3rd (A) strings are 38” from ball-end to taper. The 4th (E) string is 37” from ball-end to taper.

Please refer to our BASS GUIDE for assistance in choosing the correct scale set CLICK HERE.

$2695.00

$59.95 incl. GST

LTF-4A Low Tension Flats 42-100

$99.00 inc GST

$99.00 incl. GST

Description

 

Not all constructions are created equal. Every string in the Rx Series is uniquely constructed for that particular set. This “Focused Set Design” concept helps achieve all the elements of a perfectly balanced set such as tone, feel, vibrato, and tension. More flexible and lighter in tension compared to our SN & M Series, players will find the RX Series are more comfortable to play on any style bass. The RX Series is just the remedy your bass has been calling for!

 

Nickel-Plated Round Wound
More flexible & lighter tension than Standard La Bella SN Series
String Gauges: .045, .065, .085, .105
Versatile construction appeals to every style bass, genre of music and playing style
Made in the USA with American Wire
Packaged using MAP Technology (Modified Atmosphere Packaging) to prevent tarnishing and ensure freshness


All standard bass sets are LONG scale length. The 1st (G) string is wound the full length at 48″. The 2nd (D) and 3rd (A) strings are 38” from ball-end to taper. The 4th (E) string is 37” from ball-end to taper.

Please refer to our BASS GUIDE for assistance in choosing the correct scale set CLICK HERE.

Also available in short, medium and extra long scale models for 4-String, 5-String & 6-String Sets:

Short Scale: RX-N4D-S (32 1/4″ ball-end to taper)
Medium Scale: RX-N4D-M (34 1/4″ ball-end to taper)
Extra-Long Scale: RX-N4D-XL (38″ ball-end to taper)

Lakland HB30 Short Scale semi-acoustic bass(2023 $2795.00) $2495.00 Free Shipping

Our Skyline 44-51 shares the same slab body aesthetics of the high-end USA Series 44-51 and the same Lakland hybrid pickup as the US made 44-51M. The 44-51 captures the rich and defined power of those early basses that revolutionized the four string low-end world. The tone and power of a well-preserved vintage instrument with flawless Lakland fretwork and neck refinements make this another of our modern classics.

Nut width 1.625″
Nut type Delrin
Fret size .041/.085”
Width at final fret 2.48”
1st fret neck depth .87”
12th fret neck depth
Fingerboard radius .10″
Scale length 34″
Frets 20
Bridge string spacing .75″
Neck wood Flat-sawn Rock Maple
Body wood Ash
Fingerboard wood Fretted Maple with dots
Tuners Hipshot Ultralites (optional Hipshot D-Tuner)
Truss rod access Neck Heel: 4mm hex
Pickguard Black single-ply
Controls Volume/Tone
Bridge Lakland Dual Access (through body or through bridge)
Pickups Lakland Split Coil NeoPunch Hum-Canceller

Mark Hughes

Bass Player

Bring a cool archtop flare and big tone to your bass rig with the Lakland Skyline Hollowbody 30 short-scale bass guitar. With carved mahogany back and sides and a carved maple top, this bass gives you huge tones unlike any other hollowbody on the market. The Skyline Hollowbody 30 is armed with a pair of single-coils that deliver broad frequency response, giving you warm rotundity on the bottom, stunning midrange clarity, and creamy-smooth highs. With deep bass notes reminiscent of an upright to aggressive, throaty sounds of a solidbody bass, the Lakland Skyline Hollowbody 30 is ready for any gig.

The last one of these sold in a heart-beat. Don’t be disappointed.

$2990.00

$2995.00

LaBella Bass Strings RX-N5D

Nickel 5 String 45-130

760FS-B-TB Deep Talkin’ Bass Flats – Standard 45-128, Thru-Body 5 String

Versatility with high-end features! The 55-01 utilizes the classic Lakland body shape with a pair of Bartolini MK-1 split-coil soap bar pickups and an MK-1 onboard, 3-band buffered, active preamp. You can dial in an amazing variety of tones, from modern slap, to warm fingerstyle to aggressive picked tones. The 35″ scale neck is fast and smooth providing the killer B sound Lakland 5’s are famous for.

Deluxe Model – The Deluxe 55-01 adds a Spalted Maple veneer natural finish with an Indian Laurel fingerboard.

Nut width 1.81”
Nut type Bone
Fret size .041/.085”
Width at final fret 3.3″
1st fret neck depth .81”
12th fret neck depth .92″
Fingerboard radius 10-13″
Scale length 35”
Frets 22
Bridge string spacing .75”
Neck wood Flat-sawn Maple with graphite reinforcement bars
Body wood Ash
Fingerboard wood Maple

Tuners Hipshot Ultralites
Truss rod access Neck heel: 4mm hex
Controls Cut and boost: bass, midrange, treble, panning-style pickup blend control, Master volume (pull for tone control bypass)
Bridge Lakland Dual Access (through body or through bridge)
Preamp Bartolini MK-1
Pickups Bartolini MK-1 split coil soap bars
Finish - Natural

Was $2,795.00,  

NOW $2,495.00

$129.00 incl. GST

SOLD!

La Bella Black Nylon Tape Wound bass strings have an incredibly smooth outer wrap of black nylon to create a warm, deep, vintage tone with long sustain. Ideal for frettless bass, these strings also work well on acoustic bass guitars, and are the string of choice for many fretted electric bass players, too.

Black Nylon Tape wound strings with extra smooth surface
Warm, deep, vintage tone; long sustain
Light Tension
String Gauges: .050, .065, .085, .105
Made in the USA with American Wire
Packaged using MAP Technology (Modified Atmosphere Packaging) to prevent tarnishing and ensure freshness

All standard bass sets are LONG scale length. The 1st (G), 2nd (D), 3rd (A) strings are 38” from ball-end to silk/taper. The 4th (E) string is 36 ¾” from ball-end to silk/taper. Only the silk portion of the string should wrap around the tuning post. Only the silk should be cut or else the string will unravel.   Please refer to our BASS GUIDE for assistance in choosing the correct scale set CLICK HERE.  

LTF-5A Low Tension Flats, 5-String

42-118

$99.00 incl. GST

760FL Deep Talkin’ Bass Flats – Light 43-104

LaBella Bass Strings RX-N4D Nickel 4 String 45-105

$99.00 incl. GST

Lakland 55-01 Spalted Maple Rosewood

Lakland Skyline DJ4 Darrell Jones. Lake Placid Blue FREE SHIPPING

760FL Deep Talkin’ Bass Flats – Light 43-104

Since the 50s and 60s, La Bella’s DEEP TALKIN’ BASS Stainless Steel Flat Wounds have been the choice of professional bass players and continue to be the standard for the best sounding Flat Wounds on the market.

Stainless Steel Flat Wound; hand-polished for incredibly smooth finish
Light Tension
String Gauges: .043, .060, .082, .104
Standard Long Scale Set
Made in the USA with American Wire
Packaged using MAP Technology (Modified Atmosphere Packaging) to prevent tarnishing and ensure freshness

All standard bass sets are LONG scale length. The 1st (G), 2nd (D), 3rd (A) strings are 38” from ball-end to silk/taper. The 4th (E) string is 36 ¾” from ball-end to silk/taper. Only the silk portion of the string should wrap around the tuning post or else the string will break. This particular set is NOT suitable for basses with bridges that require strings to pass through the body of the instrument. Please refer to our BASS GUIDE for assistance in choosing the correct scale set CLICK HERE.

$2995.00 incl. GST Free NZ Shipping

Description

LTF-5A Low Tension Flats, 5-String 42-118

La Bella’s Low Tension Flats are the best-selling light tension flat wound string on the market. Adopting the same techniques behind our world-famous Deep Talkin’ Bass strings, the Low Tension Flats deliver the same classic sound but without the floppy-string effect associated with other light tension flat wound strings. These hand-wound and hand-polished strings are equipped with round cores for flexibility, and narrower ribbon wire to achieve that unrivaled smooth feeling strings uniquely characteristic to La Bella Strings.

Stainless Steel Flat Wound
Round cores for greater flexibility and narrower ribbon for an unrivaled smooth feeling
Light Tension
Total Tension in Lbs: 163.20 (1st 36.2, 2nd 34, 3rd 30.5, 4th 34.2, 5th 28.3)
String Gauges: .042, .056, .075, .100, .118
Standard Long Scale Set
Made in the USA with American Wire

All standard bass sets are LONG scale length. The 1st (G), 2nd (D) & 3rd (A) strings are 38” from ball-end to silk/taper. The 4th (E) & 5th (B) string are 36 ¾” from ball-end to silk/taper. Only the silk portion of the string should wrap around the tuning post or else the string will break. Please refer to our BASS GUIDE for assistance in choosing the correct scale set CLICK HERE.

Mark Hughes Bass Bass Player Bass lessons LaBella Strings Studio Sessions Bass Setup

LAKLAND 44-64 CUSTOM PJ BASS- HONEY BURST- ROSEWOOD BOARD


LaBella Bass Strings 750N

Black Nylon Tape wound 50-105

LTF-4A Low Tension Flats 42-100

La Bella’s Low Tension Flats are the best-selling light tension flat wound string on the market. Adopting the same techniques behind our world-famous Deep Talkin’ Bass strings, the Low Tension Flats deliver the same classic sound but without the floppy-string effect associated with other light tension flat wound strings. These hand-wound and hand-polished strings are equipped with round cores for flexibility, and narrower ribbon wire to achieve that unrivaled smooth feeling strings uniquely characteristic to La Bella Strings.

Stainless Steel Flat Wound
Round cores for greater flexibility and narrower ribbon for an unrivaled smooth feeling
Light Tension
Total Tension in Lbs: 134.90 (1st 36.2, 2nd 34, 3rd 30.5, 4th 34.2)
String Gauges: .042, .056, .075, .100
Standard Long Scale Set
Made in the USA with American Wire
Packaged using MAP Technology (Modified Atmosphere Packaging) to prevent tarnishing and ensure freshness

All standard bass sets are LONG scale length. The 1st (G), 2nd (D), 3rd (A) strings are 38” from ball-end to silk/taper. The 4th (E) string is 36 ¾” from ball-end to silk/taper. Only the silk portion of the string should wrap around the tuning post or else the string will break. Please refer to our BASS GUIDE for assistance in choosing the correct scale set CLICK HERE.

This is the fix for your tone jones. If you know Darryl’s discography, then you know he plays with the heavyweights; Miles Davis, Sting, Madonna, and, oh yeah… The Rolling Stones. The man plays a lot of bass – and needs a lot of bass to play.

Powerful and passive single-coil pickups specially designed by Lakland
Pearl block inlays in an Indian Laurel fingerboard
Hipshot Bass Xtender (D-Tuner) tuners available

The Skyline Series Darryl Jones Signature bass looks similar to our 44-60 model, but has more curvaceous contours and dramatic cutaways that adds to its vintage styling. Darryl’s bass is fitted with a pair of passive single coil pickups specially designed by Lakland. Three knobs control the tone: Bridge Volume, Neck Volume and Tone. Pearl block inlays and white binding are standard on Indian Laurel fingerboard models, Matching headstock color is standard. Hipshot bass Xtender tuners available.

Nut width 1.5″
Nut type Delrin
Fret size .041/.085”
Width at final fret 2.5”
1st fret neck depth .77”
12th fret neck depth .92″
Fingerboard radius 10″
Scale length 34″
Frets 21
Bridge string spacing .75″
Neck wood Flat-sawn Maple
Body wood Swamp Ash
Fingerboard wood
Indian Laurel with block inlays (Lake Placid Blue finish)

Tuners Hipshot Ultralites
Truss rod access Neck heel: 4mm hex
Controls Volume/Volume/Tone (passive)
Bridge Lakland Dual Access (through body or through bridge)

Pickups Lakland Vintage J single coil pickups

Finish
Lake Placid Blue with Rosewood fingerboard